Resmed Airfit N30i | Nasal Cradle Mask | Elifce Medical

Resmed Airfit N30i | Nasal Cradle Mask
BRAND : Resmed

The ResMed AirFit N30i gives your patients the freedom to sleep in any position and get close to their bed partner.
The discreet, minimalist design features a convenient top-of-the-head tube design, a comfortable nasal cradle cushion and a self-adjusting
SpringFit frame for a stable fit that lasts all night.

Share |

Detail

Before You Buy | Frame sizing

If you are male, start with the standard frame size. If you are female, start with the small frame size.
If you try the standard size first, and the frame sits too close to your ears, size down to the small frame for a better fit.
If the frame is too large, try the small size frame for a better fit.
If you try the small frame first and the frame sits too close to your eyes, size up to the standard frame for a better fit.
If the frame is too small, try the standard size frame for a more comfortable fit.

FIRST NIGHT

Ensure you have all the mask components and parts together.
Connect the elbow to the frame.
Thread the left end of the headgear into the left side of the frame and fasten the tab.
Thread the right end of the headgear into the right side of the frame and fasten the tab.
Align the arrow on the cushion to the arrow on the frame and connect together.
Connect the remaining end of the cushion and frame together with the ResMed logo facing the right way up through the headgear.

ONGOING

Locate where the air is escaping from, which is typically above or below the cushion. Note, there is an intentional vent on the front of the cushion where air will flow through. This is normal. If air is escaping, this is typically above or below the cushion.
Adjust the cushion by gently pulling it away from your face and letting it reseal itself.
Adjust the headgear as needed to achieve a more secure seal.
Check that the frame is secure and that the mask elbow and tubing are not pulling on the mask.

The ResMed AirFit N30i features a state-of-the-art pipe design that makes it easier to sleep in any position. Since there is no front end tube, the mask is invisible and lags behind your lying position.
Only 24 Dba (Whisper Quiet)
For customers looking for a silent mask, Resmed N30I is one of the best because it controls only 24 decibels. This Sound Level is Accepted as Whisper Silence and allows you to get a full night's sleep without hearing too much noise from the mask.

Starter Pack Includes Three Pillow Sizes

Finding Which Size of Pillow You Need is Always the Hardest Part of Choosing a New Mask. Faces come in different shapes and sizes and may not work for someone else, which is right for one person. Title - Resmed Airfit N30I with Starter Pack Comes with 3 Cushion Size: Small, Medium and Small Wide. Cpap will make it easier to find the mask.

Curved Nose Cushion Helps Reduce Pile While Creating A Big Seal

Looking for a great mask without too many registers? Perhaps your current mask makes it difficult to sleep in your favorite situation or do you prefer to read or watch TV before going to bed? Resmed Airfit N30I, May Be The Solution Wanted. N30I Reduces Much of the Mass in Front of the Face and Makes it Possible to Take Control of Sleep and Return to the Most Comfortable. The Curved Nasal Slide Cushion also helps when a World Class Gasket is created that is flexible enough to move with you when you find your favorite condition during sleep. The cushion was used for use at high pressure, up to 25 pressure levels.

Wide Open Field of View - Great for TV

Even when Wearing the Mask, See the Extraordinary View of the Widescreen! Resmed Airfit N30I with a favorite program, book or text chat, do not miss even a second. Minimal touch points on the face allows you to get an impressive image, where you can comfortably dive into sleep. As we have already mentioned, the spectacular landscape claustrophobia can satisfy some inside, possibly helping a person feel more comfortable wearing the mask.

Minimalist Hollow-Frame Design - Only 3 Pieces!

Headed Starter Pack Resmed Airfit N30I is One of the Most Minimal Designs on the Market Today, Consists of Only 3 Parts: Frame (Elbow), Cushion and Headboard. The air from the hose connects to the top of the head and flows through the flexible frame, eliminating the need for a short tube or other means to get air into your nose.

The frame is flexible to a wide variety of faces and extends to the curves of the start for optimum comfort. Minimal Cleansing Mask Separator Preventing Cleaning And Then The Contact Point Is Comfortable And Hairless On The Face. The Frame Comes With Soft Wraps, There Is No Silicone Feeling On This Face.

AirFit N30i user guide

AirFit N30i patient brochure

AirFit N30i fitting template

Accessories | Other Products

Airfit F20 Mouth Nose Mask

Resmed

PRODUCT NAME	Airfit F20 Mouth Nose Mask
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Full face maskAirFit F20 Whatever the sleeping position, it moves freely throughout the night.
It offers a soft hood and a soft frame for maximum comfort.
Designed for fast and easy hanging and removal. InfinitySeal pillow technology
The AirFit F20 has the most adaptable InfinitySeal ™ mindset we have designed with a soft, flexible frame with integrated cushioning. The result is a
is a mask that ensures reliable sealing during the night regardless of the sleeping position. Quietair ventilation technology
QuietAir ™ is our innovative diffuser ventilation technology in the mask case. This is 1% and 70% less than AirFit F20 2% before 2 softer. QuietAir, which has small versatile openings in a common area, breaks the air exhaled by breath and is thus spreading gently. Its AirFit F20
We are committed to making the most personalized mask possible. For this reason, we proudly present our AirFit F20 mask for stylish lavender accents and versions with a smaller size range. AirFit F20 Remove the magnetic clips. | When the mask is held, pull the head over your head. Make sure that the top of the mask pad sits comfortably above the nose bridge. The lower part of the head should fit comfortably over the upper part of your head, and the upper part of the head should sit on the head. | Lift up each of the magnets to accommodate the corresponding clips in the frame. | Set the tabs in the header. | Set the tabs in the subheading. | When your device is still switched off, connect your device hose to your mask sleeve. | Attach an elbow mask. | To help your fitness work with your therapy: | Turn on your device and position yourself as if therapy is about to start (for example, lying in bed). | Adjust your upper straps. | Adjust your lower belts. | Practice by reattaching your padding - pull your table away from your face, make your cushion re-inflated, and then reposition the inflated pillow so that the pillow membrane sits on top of the nasal foam. | |

Detail

Airfit N20 Nose Mask

Resmed

PRODUCT NAME	Airfit N20 Nose Mask
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Whatever the sleeping position, it moves freely throughout the night.
InfinitySeal ™ with cushioning technology, yet the most compatible
Ideal for breathing in the nose during sleep. Excellent comfort and performance
What does a perfect CPAP mask do? Comfort and performance are perhaps two key factors. The AirFit N20 features the most adaptive InfinitySeal ™ mindset we have designed with a soft, flexible frame with integrated cushioning. We are committed to making the most personalized mask possible. For this reason, we proudly present our AirFit N20 mask for stylish lavender axles and versions with a smaller size range.
Using Your AirFit N20; Remove the magnetic clips. | When the mask is held, pull the head over your head. | Lift up each of the magnets to accommodate the corresponding clips in the frame. | Set the tabs in the header. | Set the tabs in the subheading. | When your device is still switched off, connect your device hose to your mask sleeve. | Attach an elbow mask. | Open the therapy device. | |

Detail

Resmed Airfit N30i | Nasal Cradle Mask

Resmed

PRODUCT NAME	Resmed Airfit N30i \| Nasal Cradle Mask
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

The ResMed AirFit N30i gives your patients the freedom to sleepin any position and get close to their bed partner.
The discreet, minimalist design features a convenient top-of-the-headtube design, a comfortable nasal cradle cushion and a self-adjusting
SpringFit frame for a stable fit that lasts all night.

Detail

Resmed Quattro Air

Resmed

PRODUCT NAME	Resmed Quattro Air
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Quattro Air is a full-faced CPAP mask, the pioneer of today's popular AirFit series. Mouth and nose coverage | Full face mask | Silicone pillow | |

Detail

Resmed AirFit P30i

Resmed

PRODUCT NAME	Resmed AirFit P30i
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

AirFit P30i is designed to give you more freedom to be you. With a top-of-head connection that keeps air tubing out of your way and the streamlined style of a nasal pillows cushion, you can easily move around, watch TV or even wear glasses while wearing your mask. The nasal pillows cushion also rests securely in your nose, which helps keep the mask in place as you switch sleep positions. AirFit P30i is a nasal pillows mask designed to keep air tubing out of sight and out of your way, giving you the freedom to comfortably switch positions and sleep the way you want. Nose coverage
Nasal pillows mask
Silicone cushion

Detail

AirFit F30i Full Face Mask

Resmed

PRODUCT NAME	AirFit F30i Full Face Mask
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

ResMed AirFit F30i Full Face CPAP Mask (Medium Size) The ResMed AirFit F30i ultra-compact mask offers full-face functionality that your patients will appreciate. Smaller, quieter and less irritating than a traditional mask, with the under-nose design and overhead hose connection, CPAP, VPAP (BiPAP) treatment becomes less demanding, increasing visual and physical freedom. Issues of discomfort and facial markings on the bridge of the nose are a thing of the past. Fast and Full application Thanks to the magnetic clips, you can quickly and fully put on your mask without facing the mirror or having difficulty. Small but Stable With the ultra-compact frame, the contact points on the face and the surface that touches only under your nose are kept to a minimum, and maximum stability is ensured throughout the usage period with the side wings. Variable Silicone Thickness It has been lightened with its single-layer silicone structure, and compatibility has been achieved according to the varying thickness and comfort and stability points. Movable Elbow Since the hose connection point can rotate 360º, it will adapt to your every move. Top Link Thanks to the top connection, which is the common feature of the i series of ResMed AirFit masks, the hose will provide freedom in your sleep and respiratory treatment without restricting your movement and away from you.

Detail

ResMed Mirage Activa LT Nasal Mask (Nose)

Resmed

PRODUCT NAME	ResMed Mirage Activa LT Nasal Mask (Nose)
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Resmed Mirage Activa LT nasal mask differs from other masks with its bellows structure. Thanks to this feature, it fits the face perfectly and provides comfort. It is a light mask. It is easy to use. The forehead support is adjustable. Available in 4 different sizes.

Detail

Resmed Airfit P10 Airmini Nasal Mask

Resmed

PRODUCT NAME	Resmed Airfit P10 Airmini Nasal Mask
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Detail

MIRAGE FX

Resmed

PRODUCT NAME	MIRAGE FX
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Has a minimalist structure.
doccurs.
Adapts to n types. Get the latest technology from ResMed; and a unique mask: Mirage FX! Mirage FX is a very light and soft mask. Unlike other masks, the entire mask is made of soft silicone material & quot; Apple-converted-space & quot;
Its principle is taught. There is only one size and it fits 90% of patients. Thanks to its ergonomic design it adapts easily to the nose structure and reduces the pressure on the belt. With the mask on the mask, you can easily remove the mask from the mask when you need it overnight, so you do not have to remove it. The dedicated mask is easy to remove and install, making cleaning easy. It is one of the latest mask models presented to the market and is extremely comfortable. Thanks to the unique design of the headband connection, the mask allows the patient to move easily during the night. Due to the elastic headband, the mask remains stationary and is not affected by the movement of the patient.

Detail

SWIFT FX

Resmed

PRODUCT NAME	SWIFT FX
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Soft gland insulation: The double-walled nasal pillows are airtight during contact and gently radiate air.
Side sleep comfort: Integrated flexible dress pillow
Easy handling and installation: Lock and key for easy installation.
A silent night's sleep: Air vents emit airflow silently away from the patient and partner.
Easy to use; administration: Adjustable title that does not intervene.
Enjoy comfort with easy adjustments: There are a number of teeth marked in a simple way.

Detail

BMC P2 Pillow

PRODUCT NAME	BMC P2 Pillow
BRAND	BMC
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Head to head; fixing the hose with the band Compatible nose pads for every user with 360 degree swivel support. Full silicone nose pads do not make any traces. And with the arrow pierced exclamation port, the perpetual silence. The minimum space comfort and convenience you have. Silicone cushions for each user with 3 different sizes (S-M-L).

Detail

BMC F2 Mouth Nose Mask

PRODUCT NAME	BMC F2 Mouth Nose Mask
BRAND	BMC
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

BMC's F2 Full Length Face Mask is comfortable and quiet. It is designed to reduce the most painful contact with your face and to make you feel comfortable during treatment. BMC iVolve F2 Full Face mask is easily removable thanks to flexible head bands and clips. Due to the structure compatible with the facial structures, it does not irritate and provides a healthy use.

Detail

BMC IVOLVE N2

PRODUCT NAME	BMC IVOLVE N2
BRAND	BMC
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

BMC iVolve N2 Nasal CPAP Mask BMC iVolve N2 Nose Mask is comfortable, flexible and silent. It is designed to minimize the contact with your skin. The adjustable forehead support reduces the pressure on the nose belt. Thanks to the ball and socket system on the headband, it allows easy insertion and removal and eliminates the need for continuous adjustment. Set and forget!
The air outlet system on the elbow distributes the air with its new design and is extremely quiet. 360 ° swivel elbow allows the hose to be used comfortably during sleep. With the quick-release bracket, you can detach the mask from the hose without removing it from your face. Silicone and soft forehead pads fit in shape.
The soft double-walled mask cushion technology reduces air leakage and provides comfortable handling. For this reason, it provides you with a comfortable and quiet sleep during treatment. Skin contact reduces the most, and this makes the user feel more comfortable during treatment. The supporting frame automatically fits on the forehead. It does not contain latex.

Detail

Bmc F5 Full Face Mouth - Nose Cpap Bpap Mask

PRODUCT NAME	Bmc F5 Full Face Mouth - Nose Cpap Bpap Mask
BRAND	BMC
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Detail

Bmc F5A Oranazal (Mouth Nose) Mask

PRODUCT NAME	Bmc F5A Oranazal (Mouth Nose) Mask
BRAND	BMC
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Detail

Weinmann Joyce Easy

Löwenstein

PRODUCT NAME	Weinmann Joyce Easy
BRAND	Löwenstein
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

This elegant yet stable mask is the Full Face version of the Joyce Easy mask. It is very easy to use and has great wearing comfort. The tip and pad on the forehead support has Weinmann SilkTec coating, which makes it less hard than conventional silicone products. The mask 1 can be opened and closed manually, thanks to the easy-to-fit head bandage. The hose is connected to the mask by means of a ball joint which can turn in all directions. The hose can be attached to the head bandage with a stabilizing strap, which makes it less annoying. In addition, the mask is particularly quiet due to the specially designed air outlet which contributes to quiet nights for both the patient and the partner.

Detail

Weinmann Cara CPAP Mask

Löwenstein

PRODUCT NAME	Weinmann Cara CPAP Mask
BRAND	Löwenstein
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Looking into the future with CARA -. CARA - Designed for you. Simple use is more demanding than ever. Löwenstein Medical Technology has made masks even easier by reducing parts in every mask it produces. As we go one step further with CARA, we have perfected the proven benefits in a completely modern way. The lightweight CARA CPAP mask has a soft flexibility with full seating, a silent and scattered exhalation system and other details that make life easier. Two-dimensional stability My first impression is power. Mask pillows are soft and flexible. Ideally, it conforms to any of the nose folds and supports the mattress on the forehead. You can choose from two different sizes that can be placed in the same mask frame. The standard pillow in S / M conforms to about 65% of patients. For larger noses, you can choose M / L size . Sensational silence The exhalation system close to the top-and-socket joint has proven itself over the years. Now we were able to make it simpler and quieter. We kept the gaps creating a diffuse airflow that did not bother the patient or the bedbug, and the upper part which prevented the air from flowing into the eyes of the patient. CARA is so silent that a clock works even higher.

Detail

Löwenstein Joyce One Mouth-Nose Mask

Löwenstein

PRODUCT NAME	Löwenstein Joyce One Mouth-Nose Mask
BRAND	Löwenstein
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Detail

Löwenstein Joyce One Mouth-Nose Mask

Löwenstein

PRODUCT NAME	Löwenstein Joyce One Mouth-Nose Mask
BRAND	Löwenstein
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

Detail

NEW

Resmed AirTouch F20

Resmed

PRODUCT NAME	Resmed AirTouch F20
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

The softest mask we’ve ever designed, featuring an UltraSoft™ memory foam cushion | Light, breathable cushion is designed to seal across a wide range of therapy pressures | Modular frame design allows convenient interchangeability with AirFit™ 20 InfinitySeal™ cushion | | Our softest mask ever This is a mask unlike anything we’ve ever designed. The AirTouch F20 is the first ResMed mask to use proprietary UltraSoft memory foam cushion technology for the perfect blend of comfort and performance. The AirTouch F20 delivers unprecedented comfort and a light, breathable seal – even at high pressures. And with its modular frame design, you can conveniently switch between AirTouch 20 memory foam and AirFit 20 InfinitySeal cushions, without removing the mask frame, until you find the best option for each patient. QuietAir vent technology QuietAir™ is our innovative diffuser vent technology within the mask elbow that makes the AirTouch F20 89% quieter1and 70% gentler than before.2Featuring small multidirectional openings over a widespread area, QuietAir breaks up exhaled air so that it’s spread out lightly. Fast and easy maintenance With the AirTouch F20, maintenance is fast and beyond simple. No soap, no water – a quick wipe down with non-alcoholic wipes keeps the memory foam clean. That’s it. And with regular cushion replacement, patients experience a fresh feeling every time, like a clean set of sheets or a brand new shaving razor. Our AirTouch 20 for Her range We’re committed to providing the most personalized mask experience possible. That’s why we proudly offer for Her versions of our AirTouch F20 mask, featuring stylish lavender accentsand a smaller size range.

Detail

NEW

AirFit P10 Nasal Pillow Mask

Resmed

PRODUCT NAME	AirFit P10 Nasal Pillow Mask
BRAND	Resmed
CATEGORY	Resmed Airfit N30i \| Nasal Cradle Mask

A CPAP mask built for active sleepers, theResMedAirFit™ P10 Nasal Pillow CPAP Mask With Headgearcreates a secure and reliable seal, providing you the freedom to move comfortably throughout the night. Boasting a lightweight design and flexible nasal pillows, the AirFit P10 is also ResMed’s quietest mask thanks to QuietAir vent technology, keeping your sweet dreams and silent night top of mind.

Detail

0532 662 46 62

Whatsapp'dan Yazın

PRODUCTS