device

AirSense 10 Elite Supplier. To navigate through non-complicated settings and menus, just start and press the button to go hunting. The integration of this device in the HumidAir ™ (Humidifier), a more comfortable experience and convenient temperature and humidity retention tube automatically work.

A comfortable start! (AutoRamp) If you have a sleeping problem, go for them with low pressure cushioning too. AutoRamp starts with low pressure for more comfortable sleep.

Built-in ambient light sensor !! The light level of the screen is based on the brightness of the environment. Bring your keyframe to the screen. The screen light shuts off at night so as not to disturb the more comfortable sleep.

Other Features

The Easy-Breathe engine is quieter than you and your partner whisper, offering more peaceful night's sleep.
The simple and intuitive user interface provides feedback on morning treatment and it is much easier to change settings.
User-friendly controls make it easier for you to navigate and customize the menus with the color LCD display.
The SmartStart ™ function initiates the therapy with breathing into the size mask as soon as possible. If you just remove the dick, stop in a few seconds.
Integrated HumidAir ™ humidifier with Climate Control technology and optional ClimateLine (thin hose) Long lasting humidification with air heated tube.
How to use?

Here are some tips on setting up the site;

The therapy system most likely consists of a mask, a tube, a therapy device, and a moisturizer. Translate for all sections. Knowing how to set up equipment and equipment does not make you different for your treatment!

SOME TIPS IN RESMED:

First, make sure you place it on a specific surface. Do not put your business into luck.
When you sleep in your bed, put it in a place where you can reach the auditors.
If the device is empty, someone does not cover it with the cover, keep it away from materials such as walls, heaters.

ResMed S9 Escape is the award-winning S9 standard CPAP platform model. User-friendly features and a host of advanced technologies are designed to help ease the transition. So you can get long-term benefits with a restful sleep. With elegant lines and compact size, the S9 Escape design looks natural on the bed, like a clock radio. It is an elegant comfort device away from the pessimistic air that the medical devices reflect to the subconscious.

Key Features

With the Easy-Breathe motor feature (and your partner's) sleeping environment is quieter and quiet.
Optional H5i ™ Climate Controlled Heated Humidifier provides an ideal humidification and temperature setting for real-time environment. Thus, dry throat and mouth side effects are most reduced or protected. The synchronized heater will provide complete protection from condensation.
Easy-Breathe technology will give you a really comfortable breathing experience. Natural inhalation and exhalation patterns are monitored by the device.
User-friendly controls, intuitive interface and bright color LCD guide you through the setup process and make it easy to navigate menus and customize settings.
Slim design makes your movements easier on your trips.

Reslex - Expansion Comfort

Respirox CPAP also offers exclusive reslex technology, which allows the patient to have better respiratory comfort, reducing pressure on the outside, and allowing the patient to spend less effort during sleep.

Reslex Feature

It is the ability to throw excess pressure out of the patient without exposing the patient during expiration, minimizing effort. This feature minimizes the causes of heart rhythm disturbances in patients. The goal is to get the rest of the day away from the pressure of the patient, while allowing the patient to have a comfortable night's sleep. In order to activate Reslex feature, user login must be done from the menu.

iCode Feature

The ability to save users' data. The Respirox CPAP device records data for 365 days. is an advanced technology that allows patients to see the time they have used before and the AHI (apnea, hypopnea) indices.

* The length of time the patient has used

* Device, mask, patient compliance

* AHI (apnea hypopnea) indices

* Average pressure

* Mask escapes

It keeps the user visible and keeps it in memory for 365 days. When the data storage is full, it saves the last day and deletes the day that it was first used, so you can see your current data whenever you want.

Auto User Features

* Respirox devices are equipped with a breathing sensor, without any trouble to press any key before the auto-opening feature of the device by removing the mask and auto-off feature is enabled. this feature can be activated and disabled from the menu.

* In heavy mask leakage, the device switches to alarm position and warns the user.

* Automatically adjusts the altitude level of the area you are in.

* If the power is turned off while the device is in operation, an automatic alarm is activated and warns the user.

Heater Humidifier Features

Respirox devices can optionally be integrated in the heater humidifier to adjust the temperature setting of the incoming air to the user in 5 steps.

With a lid guard designed to prevent water from escaping into your device, it allows you to use your device comfortably during the night. With a heating feature between 1-5, it allows the patient to have a comfortable night's sleep without being exposed to cold weather during sleep.

Smart Phone Application

To download free software (3B / BMC iCode) for Respirox devices, you can view your data anywhere and anytime using your iPhone and Android devices, iTunes and GooglePlay.

TECHNICAL SPECIFICATIONS :
Dimension: 22cm * 19,4cm * 11,2cm
Weight: 2.0 kg
Power requirement: 230 VAC, 50 Hz
Reslex: 3 step
Pressure range: 4-20 cmH2 °
Heater humidifier: (optional)
Noise level: 24dBA
365 days to record data
Ramp time: 0-60 minutes
Automatic altitude setting: 4 stages
Auto On / Off
Treatment counter
Automatic air leak compensation
Detailed data recording
iCode feature
Usage hour report
Alarm: Power failure, mask and hose leak alarm
Approved by Ministry of Health CE and ISO Certified

Respirox Auto AUTO CPAP Device Automatic Pressure Setting Technology and Sensitivity Setting Reslex feature iCode Remote Advanced Data Recording Data Recording 365 days Auto Swich feature (auto on / off) Auto Altitude setting Alarm feature Emergency warning 5 stage Integrated heater humidifier For easy transportation holding line Min - Max 4 cmH2O / 20 cm H2O pressure range

Reslex Feature

It is the ability to throw excess pressure out of the patient without exposing the patient during expiration, minimizing effort. This feature minimizes the causes of heart rhythm disturbances in patients. The goal is to get the rest of the day away from the pressure of the patient, while allowing the patient to have a comfortable night's sleep. In order to activate Reslex feature, user login must be done from the menu.

iCode Feature

The ability to save users' data. The Respirox CPAP device records data for 365 days. is an advanced technology that allows patients to see the time they have used before and the AHI (apnea, hypopnea) indices.

* The length of time the patient has used
* Device, mask, patient compliance
* AHI (apnea hypopnea) indices
* Average pressure
* Mask escapes
It keeps the user visible and keeps it in memory for 365 days. When the data storage is full, it saves the last day and deletes the day that it was first used, so you can see your current data whenever you want.

Auto User Features

* Respirox devices are equipped with a breathing sensor, without any trouble to press any key before the auto-opening feature of the device by removing the mask and auto-off feature is enabled. this feature can be activated and disabled from the menu.

* In heavy mask leakage, the device switches to alarm position and warns the user.

* Automatically adjusts the altitude level of the area you are in.

* If the power is turned off while the device is in operation, an automatic alarm is activated and warns the user.

Heater Humidifier Features

Respirox devices can optionally be integrated in the heater humidifier to adjust the temperature setting of the incoming air to the user in 5 steps.

With a lid guard designed to prevent water from escaping into your device, it allows you to use your device comfortably during the night. With a heating feature between 1-5, it allows the patient to have a comfortable night's sleep without being exposed to cold weather during sleep.

Smart Phone Application

To download free software (3B / BMC iCode) for Respirox devices, you can view your data anywhere and anytime using your iPhone and Android devices, iTunes and GooglePlay.

TECHNICIAL SPECIFICATIONS :

Dimension: 22cm * 19,4cm * 11,2cm
Weight: 2.0 kg
Power requirement: 230 VAC, 50 Hz
Reslex: 3 step
Pressure range: 4-20 cmH2O
Heater humidifier: (optional)
Noise level: 24dBA
365 days to record data
Ramp time: 0-60 minutes
Automatic altitude setting: 4 stages
Auto On / Off
Treatment counter
Automatic air leak compensation
Detailed data recording
iCode feature
Usage hour report
Alarm: Power failure, mask and hose leak alarm
Approved by Ministry of Health CE and ISO Certified

AirSense 10 AutoSet is a self-regulating pressure therapy device that automatically adjusts pressure levels to suit your needs and to ensure you get the lowest pressure you need. When AirSense 10 AutoSet ResMed is used with the new Humidair heated humidifier and the ClimateLineAir heated tube, it offers the most comfortable temperature and humidity levels.

Key Features

Intelligent detection: With sleep-on detection AutoRamp starts by offering low pressure for extra comfort and after sleeping, gradually boosts pressure to the predicted level.

Just press the start key and get ready!

Simple and intuitive user interface provides feedback about treatment every morning. It is now easy for you to change the comfort settings with this interface.

Other Features

Built-in ambient light sensor; The light level of the display is automatically adjusted according to the brightness of the room. If you need to get up all night, the back of the screen will not spoil your partner and your comfort.
The Easy-Breathe engine provides you and your partner with a more peaceful night's sleep.
When the SmartStart function is masked, sleep apnea therapy begins with breathing. If you remove the dock, the unit automatically stops after a few seconds.
Increased comfort and consistent dampening throughout the night with the integrated Humidair ™ humidifier. Climate Control technology provides ultimate comfort, controlled heated tubing, and optional ClimateLineAir provides complete comfort.
How to use?

Here are some tips on setting up equipment; The therapy system most likely consists of a mask, a tube, a therapy device, and a moisturizer. You only need to navigate the therapy menu to set all the parts to detect. Having information about all equipment for your treatment and making the adjustments correctly will make your treatment much easier.

Here are some tips from ResMed:

First, make sure that you place the device on a stable, flat surface without covering it over. Do not put your business into luck.
Put your device in an accessible position for inspections when lying in your bed.
Do not cover the device with any blank, keep it away from materials such as walls, heaters, etc.

RESLEX FEATURE

It is the ability to throw excess pressure out of the patient without exposing the patient during expiration, minimizing effort. This feature minimizes the causes of heart rhythm disturbances in patients. The goal is to get the rest of the day away from the pressure of the patient, while allowing the patient to have a comfortable night's sleep. In order to activate Reslex feature, user login must be done from the menu.

CODE PROPERTIES

The ability to save users' data. The Respirox CPAP device records data for 365 days. is an advanced technology that allows patients to see the time they have used before and the AHI (apnea, hypopnea) indices. The duration of the patient's use, the duration of use, device, mask, patient compliance, AHI (apnea hypopnea) indices, Mean pressure, Mask leaks

Allows the user to see and hold in memory for 365 days. When data storage is full, it saves the last day and deletes the day it was first used, so you can see your current data every time you want.

PERFORMANCE CHARACTERISTICS RESPIROX BiPAP S DEVICE

Automatic Pressure Setting and Sensitivity Setting

Reslex feature (Pressure Reduction)

ICode Remote Advanced Data recording

Data recording 365 days

Auto Swich feature (auto on / off)

Auto Altitude setting

Alarm feature

Air leak warning

5 stage Integrated heating humidifier Handle for easy handling

EPAP - IPAP Working between 4 cm HO2 / 30 cm HO2

Four modes: CPAP, Spontaneous (S).

AUTOMATIC PRESSURE ADJUSTMENT AND SENSITIVITY ADJUSTMENT FEATURES

Pressure adjustment depending on the position of the bed, measuring the most appropriate pressure to the patient.

Instant response to precise pressure changes with a pressure range of 0.5 - 1.

The sensitivity can be adjusted according to the needs of the patient between 1-5 so that they can breathe without giving the patient with a smooth usage.

RESLEX FEATURE

It is the ability to throw out excess pressure by expending a minimum effort without exposing the patient during expiration. The goal is to get the rest of the day away from the pressure of the patient, while allowing the patient to have a comfortable night's sleep. To enable the Reslex feature, a menu entry must be made.

iCODE FEATURE

The ability to save users' data. Respirox Bpap ST records data for 365 days. It is a sophisticated technology that allows patients to see the time they have used before and the AHI (apnea, hypopnea) indices.

* The length of time the patient has used

* Device, mask, patient compliance

* AHI (apnea hypopnea) indices

* Average pressure

* Mask escapes

It keeps the user visible and keeps it in memory for 365 days. When the storage is full, it saves the last day and deletes the day it was first used, so you can see your current data every time you want.

AUTOMATIC USER FEATURES

* Respirox devices are equipped with a breathing sensor, without any trouble to press any key before the auto-opening feature of the device by removing the mask and auto-off feature is enabled. This feature can be activated and disabled from the menu.

* In heavy mask leakage, the device switches to alarm position and warns the user.

* Automatically adjusts the altitude level of the area you are in.

* If the power is turned off while the device is in operation, an automatic alarm is activated and warns the user.

HEATER HUMIDIFIER FEATURES

Respirox devices can optionally be integrated in the heater humidifier to adjust the temperature setting of the incoming air to the user in 5 steps.

It is designed to prevent water from escaping into the device, allowing you to use your device easily during the night.

With a heating stage of 1-5, the patient can get a comfortable night's sleep without exposure to cold weather during sleep.

For more information about iCode functions, you can view the Respirox iCode Quick Reference Form.

SMART TELEPHONE APPLICATIONS

To download free software (3B / BMC iCode) for Respirox devices, you can view your data anywhere and anytime using your iPhone and Android devices, iTunes and GooglePlay.

TECHNICIAL SPECIFICATIONS :

• Respiration rate (Res. Rate)

• Measure: 22cm * 19,4cm * 11,2cm

• Weight: 2,0 kg

• Power requirement: 230 VAC, 50 Hz

• Reslex: 3 step

• Pressure range: 4-30 cmH2 °

• Heated humidifier: (Optional)

• Noise level: 24 dBA

• Can record 365 days of data

• Ramp Time: 0-60 minutes

• Automatic altitude setting: 4-stage

• Auto On / Off

• Treatment counter

• Automatic air leak compensation

• Detailed data recording

• iCode feature

• Usage hour report

• Alarm: Power failure, mask and hose leakage alarm

• Adjustable trigger and speed indicator

The CPAP device is silent and easy to carry, with a short treatment time and constant pressure; The SGK is an affordable device for contracting your sleep apnea and other disabilities with the possibility of negotiable price-fixing.

Auto CPAP devices are suitable for your sleep apnea and other ailments with the possibility of quiet and easy transportation and with the possibility of having your doctor's discretion to arrange for your discomforts with the appropriate equipment and masks and with SGK's contracted economical price. devices.

Opportunity to pay the price with economical installment by contracting with our respiratory, sleeping, apneic, oxygen people with our convenient devices and masks for your discomforts which are diagnosed by the doctor with easy transportation with BPAP SGK & OML; .

ResMed (NYSE: RMD, ASX: RMD), a world-leading connected health company with more than 5 million cloud-connected devices for daily remote patient monitoring, changes lives with every breath. Its award-winning devices and software solutions help treat and manage sleep apnoea, chronic obstructive pulmonary disease and other respiratory conditions. Its 6,000-member team strives to improve patients’ quality of life, reduce the impact of chronic disease and save healthcare costs in more than 120 countries. At ResMed we believe that every breath is an opportunity to make a positive change in people’s lives. We’ve been helping change lives since 1989, and our logo embodies this guiding philosophy. See for yourself.

It is a self-tuning PAP device with comfort comfort features. Ideal for home or hospital use. In addition, robust ergonomic design and small structure make the device suitable for your travels. Constant pressure range is 3 cmH2O to 20 cmH2O. As with all SleepCube CPAP devices, it can easily be fitted to a heated humidifier.

The patient should have spontaneous breathing, but the breathing frequency should be adjustable by the device. The BPAP ST should be tried in cases where BPAP does not enter the respiratory tract, treatment is required at higher pressure, and especially in the presence of central apneas. In patients with obstructive sleep apnea syndrome as well as pathologies leading to alveolar hypoventilation such as restrictive pulmonary disease, COPD, obesity-hypoventilation syndrome, sleep-related hypoventilation / hypoxemic syndrome, it may be advisable to use spontaneous respiration and determination that the triggering power is insufficient.

Oxygen concentrator devices are molecular sieves, which separate gases from ambient air and produce oxygen at 95% (± 3) purity. Molecular sieves can be used to produce industrial oxygen concentrators, as well as devices that provide oxygen-friendly oxygen gas for treatment of COPD and similar chronic respiratory disorders. Oxygen concentrators are used at home or in the hospital for treatment of many respiratory diseases.

The Resmed S9 AutoSet premium auto-adjusting device, designed to help patients comfortably adjust to sleep apnoea therapy and encourage long-term compliance.

The S9 AutoSet responds to flow limitation to pre-emptively treat apnoea events and prevent more serious, subsequent events from occurring. Using ResMed's enhanced Autoset Tecnology, it automatically adjusts breath by breath, as a patients respiratory needs change - hourly, nightly and from season to season - to deliver the lowest therapeutic pressure. As a result, the AutoSet algorithm has been clinically proven to increase patient comfort and compliance. Resmed S9 AutoSet

With the experience of the Hospital, you can perform a sleep test safely in your natural sleep without having to go into hospital stress on your own bed with a mobile polysomnography device. You can learn the causes of your sleep problem through this test and plan your treatment.

Our specialist sleep technicians come to your house at the scheduled hour. Within 15 minutes, the polysomnography device makes the connections of the electrodes ready, starts to record and leaves home. The next morning, he arrives at your house early and takes delivery of the device and the records in it.

We are at your service with our experienced personnel in the maintenance and repair of all respiratory devices.

Each CPAP device has an expected life span of up to five years. Some users will see that their devices are working much longer for a longer period of time. The key point here is that cleaning and maintenance are done properly.
Each brand CPAP device has one or more filters that must be changed at regular intervals. The expected life of each filter type may vary, but generally single-use (or paper) filters should be replaced once a month, and non-disposable filters should be replaced every 3-6 months.
Non-disposable filters are generally made of some kind of foam and these filters can be re-used after being cleaned with water and thoroughly dried. Washing these filters will increase the service life, but they must be replaced at least every six months.
CPAP devices do not need to be cleaned, but it is recommended to wipe with a slightly damp cloth to remove dust. Do not forget to check the air inlet to the device against dust accumulation.
Never immerse the appliance in water.
Protect your device from direct sunlight.

Moisturizing Cleansing

Humidifiers may be integrated into the CPAP device or may be separate. No matter what type of humidifier, there is a part of the humidifier that requires proper maintenance and cleaning.
In order to use your humidifier in the most healthy way, carefully follow the instructions for use and always use clean carboy water. Minerals and chemicals in the tap water can damage the humidifier water tank.
Regular cleaning of the humidifier water tank is a must. After each use, drain the water, clean with a mild soap and water mixture and rinse thoroughly.
It is useful to disinfect the humidifier water tank every two weeks. For this purpose, immerse in a 1/5 vinegar / water mixture and leave for 30 minutes, then rinse thoroughly and dry. If your humidifier is indicated for use in the dishwasher in the operating instructions, you can also do so in accordance with the instructions.
The humidifier water reservoirs also have a certain useful life, which is usually no more than six months. Check the manufacturer's instructions for this.

RECOMMENDATION: When you are sick, cleaning your mask, hose, humidifier and filters every day as long as your cold, flu or viral symptoms persist, will help your disease not to grow longer.

It is important to clean your equipment as specified in the product instructions. Failure to do so properly may reduce the effectiveness of your sleep treatment and cause damage to your equipment.
 
Do not use alcohol or cleaning solutions when cleaning masks, nasal pads or circuits. Otherwise, these parts may be damaged. Use only warm soapy water.
 
Daily cleaning
Mask:
- Remove the mask / nasal pads from the cap.
- Clean with warm soapy water. Rinse.
- Let it dry.

Circuit:
- Wash in warm soapy water, rinse and allow to dry.
 
Moisturizer:
- Empty the humidifier and let it dry. Replace the water in the humidifier. Always use distilled water in the humidifier to prevent deposition of mineral debris.
 
Weekly cleaning
Filter: Clean the gray / black foam filter on your machine with warm soapy water. Rinse. Let it dry. Reinsert.
 
Headgear: Wash head with hand using warm soapy water. Rinse and leave to dry.
 
Device: Wipe the device with a soft, damp cloth.
 
Moisturizer: Clean the humidifier chamber with white vinegar to prevent mold. Be sure to rinse thoroughly with distilled or sterile water before using the humidifier.
 
Monthly cleaning
Filter: Replace the replaceable white filter (if applicable).

In order to purchase a device from the Social Security Institution;

First of all, you need to apply to SSI Directorate. The organization will give you the device specified in your report from its own inventory. However, if there is no equipment in stock for the institution, you will be able to purchase the device from the medical distributor and receive a refund from the institution pursuant to Article 7.2.2 of the SUT (Health Implementation Communiqué).

Documents required for reimbursement;

• The report or your prescription must include 'No organization' approval.
• UBB (National Knowledge Base) registration of the device.
• Warranty Certificate of the device.
• Proof of Entitlement for the company from which you purchased the device.
• A commitment to return the device to the institution at the end of the treatment.
• UBB tag (Barcode) of the device.
• Company UBB Registration.

• Unclip the magnetic clips.
• With the mask held against the face, pull the headgear over the head. Ensure the top of the mask cushion is sitting comfortably at the top of the nasal bridge. The bottom of the headgear should settle comfortably at the top of the neck – with the top of the headgear sitting on the crown.
• Bring each of the magnets up to meet their corresponding clips on the frame.
• Adjust the tabs on the upper headgear.
• Adjust the tabs on the lower headgear.
• With the device still switched off, connect the device tubing to the mask elbow.
• Connect the elbow to the mask. 
  
  To prepare the mask for therapy:
• Switch on the device and position the patient as if they were to begin therapy (e.g. lying down in bed).
• Adjust the upper straps.
• Adjust the lower straps.
• Practice reseating the cushion – turn off the device, pull the mask away from the face, allow the cushion to reassume its natural shape and then resettle the cushion on the face, with the top of the cushion sitting at the top of the nasal bridge. 

Oxygen concentrators decompose oxygen from gases in the air to provide patients with high concentrations of oxygen gas. These devices are commonly used in patients' homes. Light and portable models are also available for mobile use. The portable oxygen concentrator produced in order to ensure better quality of life for patients is the Inogen One G3 battery and is easy to use. It provides high intensity oxygen output. The Inogen One G3 portable oxygen concentrator can be used at home, at work, in a vehicle or in different locations without the need for electricity. The LCD shows the remaining battery time in hours and minutes. This allows the user to know when to charge the device.

The Inogen One G3 portable oxygen concentrator determines the onset of breathing and gives the user the right time and amount of oxygen while breathing. The device detects every breath received and works synchronously with the user. There are audible and visual alarms on the device. For example, when the person is not breathing or the cannula is disconnected, the device detects and emits an audible alarm. Thus it warns user in critical situations. This gives confidence to the patient and their relatives.

The Inogen One G3 portable oxygen concentrator is available 24 hours a day. Thanks to the car cigarette lighter kit, it works even without traveling.

Place of production: America
Warranty period: 3 years
Weight: 2.2 kg
Pulse dose: 4 levels
Working time with battery: 9 hours
Can work 24 hours a day
Sound level: 42 dBA

These documents will be refunded to SSI by Social Security Institution. The payment amounts of the institutions are as follows. VAT rate is 8%.

• OXYGEN CONCENTRATOR: 899,33 TL
• CPAP DEVICE: 702 TL
• AUTO CPAP DEVICE: 1404 TL
• BPAP DEVICE: 2214 TL
• BPAP ST EQUIPMENT: 5184 TL
• AVAPS DEVICE: 5184 TL
• ASV DEVICE: 8100 TL
• NOSE MASK: 220 TL
• MOUTH NOSE MASK: 236 TL
• HOSE: 29 TL

SGK You can contact our customer representative for contract product supply and consultancy services.

1. Which unit should be visited in the Social Security Institution?
Answer: You need to go to the Returned Devices Service connected to the SGK Directorates with your reports and documents. The Service inspects your documents and delivers the device in stock without a fee request. However, institutions do not interfere with the consumables of the devices (masks, hoses, filters, etc.).

2. Does the SSI give a new device?
Answer: The devices you have received by SGK are not zero. Because SSI does not buy new devices. Previously used devices are returned to the patients are given again.

3. Does the device I purchased belong to me?
Answer: If you have to buy the device because SGK is not in stock, you have to return the device to SGK at the end of the treatment if you get the institution repayment. Even if you have paid a difference to the device you have purchased the device you receive payment from the institution you are embezzled and the institution belongs. There is no proportion of the difference amount you have paid. You shall bear all the difference fee above the corporate payment amount specified in the Health Implementation Communiqué.

4. When and how does the SSI pay back?
Answer: The amount of the repayment of SGK device within 20 - 45 days. Ziraat Bank T.C. Your ID is deposited in your number.

5. How long is the prescription validity period?
Answer: You must apply to the institution within 13 days after your prescription is written.

6. Where will I take the device in case of technical failures related to the devices?
Answer: In the technical problems related to the device you have used, you should first bring the device to the institution. If the technical service of the institution cannot be intervened, you must contact the technical service of the manufacturer.

7. Who is paying for the service charge when the device is sent to technical service outside the scope of the warranty?
Answer: SGK service fee is up to 1.000 TL. If the service fee above this amount, the institution does not accept this fee, the device is scrapping and giving the new device to the patient.

8. What should I do when there is a power failure in the treatment of the oxygen concentrator, which is constantly used?
Answer: You will need to have an oxygen cylinder as an alternative to power outages.

Device Features

• Modes CPAP, AUTOCPAP
• Pressure Range 4 - 20 mbar
• Masks Nose / Mouth Nose (Optional)
• Accessories Cigarette Lighter Adapter / Li-Ion Battery / Humidifier
• Working Principle Pressure Targeted
• No Additional Indicators
• Programs MAP V2
• Adapter 60 W

Technical specifications

• Color White
• Weight 1.3 kg
• 17 cm wide
• Length 23 cm
• Height 8,6 cm
• Noise Level 28 dB
• Energy Consumption 24 W
• Power Supply 100..240VAC 50..60Hz 45 W
• Automatic Above Sea Level
• Storage Temperature -25 ° C .. + 75 ° C
• Working Temperature 5 ° C .. + 40 ° C
• Humidity Range 5..95%
• Warranty 2 Years

Obesity, which should be done first in the treatment of sleep apnea, is to be overcome. If there are significant anatomic strictures in the upper respiratory tract, the patient should be evaluated for surgical intervention by an Ear Nose Throat specialist.

 Progressive airway pressure (CPAP) therapy should be used in the treatment of sleep apnea. Depending on the treatment effect and the patient's preference, the patient should be followed up either by making adjustments in automatic settings or by switching to a constant pressure device. In case of difficulty in using CPAP device or in case of mild cases, it can be prevented to block the upper respiratory tract by falling back to the lower jaw with the appliance in the mouth.

 The specific treatment of sleep apnea is provided by the use of devices that deliver compressed air to keep the airway open continuously. PAP (positive airway pressure) devices prevent sleep apnea by allowing upper airways to remain open during sleep. These devices, which give compressed air through a silicon mask that sits firmly on the face during the night, may initially seem annoying to the patient. However, patients who wake up in the morning and have wakefulness easily accept the device. A second night must be spent in the sleep laboratory to determine which device is appropriate for the patient and to see if apneas are missing or have been reduced to a minimum number. After sleep apnea therapy, the survivors of sleep apnea survivors rise again.

The respiratory device, also called the ventilator, is used in the treatment of chronic respiratory insufficiency. Long-term mechanical ventilation at home is very important in the treatment of respiratory insufficiency. Breathing apparatus is widely used, especially in terms of chest wall and neuromuscular diseases. Two types of respiratory support are given to the patient through the ventilator used in ALS patients.

Non-invasive mechanical ventilation: Use of a respiratory support device only with the aid of a mask without opening the hole in the patient's respiratory tract

Invasive mechanical ventilation: The use of a breathing apparatus that will provide respiratory support by opening a hole in the respiratory tract, ie tracheostomy, by means of a cannula placed in the hole

Determination of home-type invasive mechanical ventilation device

The MV parameters for the patient's respiratory system must be determined
The power source of the breathing apparatus should be explained.
The desired alarm and warning systems in the respiratory device should be determined and the alarm limits should be set in the most appropriate way. In other words, systems such as power cut, oxygen deficiency, high pressure, battery power, charge level should be in the desired form if the patient leaves the device.
A spare ventilator should be provided with the breathing apparatus and it should be possible to use the spare breathing apparatus as soon as the problem is solved.
Patients should be tested for at least 48 hours with this respiratory device in the hospital or intensive care unit, as the type and parameters of the respiratory device that will be appropriate for the patient are determined by a specialist neurologist or chest physician in this area.

In this process, it is possible for the device to be suitable for the patient and for the patient to adapt to the device. Although the parameters detected in patients are applied, sometimes problems may arise in different respiratory devices. For this reason, more than one breathing apparatus may need to be tested. In cases where respiratory support at home is to be applied, the family doctor and the nurse who follows the patient can make a more successful application.

Cpap and BiPAP are respiratory devices used in patients with respiratory problems.

BIPAP (Bilevel positive airway pressure)

Continuous positive airway pressure (CPAP)

These two devices are used for external breathing assistance. Respiratory devices can be used not only for ALS, but also for many respiratory problems such as chronic lung disease, sleep apnea. Here, the target is to provide mechanical respiratory support for patients who can not get enough oxygen due to respiration. For ALS patients, a respiratory device, usually of the BIPAP type, is used. This is caused by the fact that these patients lose their ability to breathe spontaneously, especially in the night. The BIPAP breathing apparatus automatically switches on in this case, providing the patient with breathing needs. By responding to the respiratory reflex, they help the patient. These features are referred to as BIPAP S / T devices. They have an automatic respiratory system.

Artificial respiration ie mechanical ventilation can be done in 2 ways;

Non-invasive ie masked

Invasive, that is, breathing is made with a larynx attached to the tube. This is done by opening a hole in the patient's throat with a small surgical procedure.

A specialist doctor can decide which method will be applied to the patients. If there is a delegation report, respiratory devices may be covered by the social security institution. However, after the treatment, the devices must be returned to the institution.

Sleep Respiratory Disease (Obstructive Sleep Apnea Syndrome)

Recurrent respiratory disorders (apnea, apnea, hypopnea: hypopnea) develop as a result of obstruction of the throat during sleep.
It causes sleep interruption due to the complete interruption of breathing or a considerable decrease in sleep during sleep, and causes a decrease in the proportion of oxygen in the body. Breathing ends with waking, breathing starts again. When alertness occurs in the nervous system, the effect of the relevant nervous system on the heart and vessels causes the blood pressure to rise. Degradation of sleep affects metabolism and sexual functions. Obstructive sleep apnea syndrome is therefore an important health problem that affects many body systems.
Patients often disgrace in a noisy way, have not received their morning sleep, wake up unrestrained. With the cause of insomnia, disturbances in mental ability and sleepiness during the day can develop.
Excessive weight, causes in the throat tightness, alcohol intake in the evening, some drugs aggravate respiratory arrest in sleep. The use of non-prescription medicines can be detrimental to the use of medicines related to sleep without knowing the underlying problem.
Obstructive sleep apnea syndrome is diagnosed in the sleep laboratory for sleep and respiratory changes. It is also necessary to work in sleep laboratories to regulate treatment in patients who will undergo pressure therapy
The prospect of community health can be summarized in three main sections:

Sleep disordered breathing is a common condition in the community: The most common cause of excessive sleepiness is known as sleep apnea syndrome (obstructive sleep apnea syndrome). It has been shown in studies that obstructive sleep apnea syndrome is present in 4% of men and 2% of women in adulthood. Up to 3% of cases have been reported in studies conducted in children. However, very few of the patients are diagnosed. It is estimated that only 1/10 of the patients can be diagnosed in USA where sleep laboratories are common.
Obstructive sleep apnea syndrome leads to major health problems (illness and death). Clinical consequences such as sleep disturbance, decreased oxygen, increased hypertension in patients with sympathetic nervous system hypertension, respiratory and cardiac insufficiency, stroke, impaired cardiac rhythm, and overweight (obesity) may develop. Insomnia can lead to accidents in people who use vehicles that require careful attention. Patients' compliance with their surroundings may deteriorate, job performance and quality of life may decrease. Studies have shown that the life expectancy of patients with obstructive sleep apnea hypopnea syndrome is reduced compared to the non-ill persons due to the mentioned disease outcomes and the expectation of life expectancy by treatment can be increased. Increased cardiovascular disease in these patients may result in fatal outcomes. This suggests the importance of obstructive sleep apnea syndrome in terms of community health.
Obstructive sleep apnea syndrome is a treatable disease. In obstructive sleep apnea syndrome, efficacy has been shown for today, it is a pressure therapy applied through mask in the form of treatment. The purpose of the treatment is to keep the upper airway, which has increased tendency to close during sleep, by giving positive pressure from the outside. Surgical treatment may be appropriate for patients with moderate disease who are not overweight and have anatomic stenosis in the upper airway. The other treatment that can be selected in these patients is oral devices (oral appliance). It can be said that treatment can reduce or eliminate the negative consequences of obstructive sleep apnea syndrome.
In summary, obstructive sleep apnea is an important public health problem threatening the quality and duration of the hypopnea syndrome. It needs to be recognized and treated appropriately in terms of patient and community health. Diagnosis and treatment are possible when referring to health centers, sleep laboratories related to the subject.

If you are snoring - especially if you snore with a loud voice - you know how destructive it can be. You are disturbing your neighbors when you sleep on airplanes or theaters. Your bed partner complains that they can not sleep and take you to a spare room or a sofa. In fact, 95% of the snoopers say that their snoring disturbs their partner.

And whether you know it or not, it causes damage to your sleep. Snoring means you can not get the amount of oxygen you need for a healthy night's sleep. And you know what happens when you are not feeling well: You are tired, you are a list, you are even grumpy.

Noisy, disturbing snoring can also have other less pronounced side effects. The snoring is 1.6 times more to develop high blood pressure within 4 years to snore at the beginning. Other cardiovascular diseases also have risks.

So if you suspect that you are snoring or snoring, consider it as a sign that something may not be right. Join our short sleep apnea test or contact us to find a sleep test facility near you.

Remember: Snoring can not be treated, but can be controlled. An oral device like Elifce Medikal ResMed successfully stops snoring at about 8 loudspeakers out of 10 using it.

Treatment options for your snoring depend on a number of factors, but the two key ones are these:

Do you snore through your nose or through your throat?
Do you snore and have obstructive sleep apnoea (OSA)? 
At ResMed, we have solutions for throat snorers, as well as for throat snorers with sleep apnoea. This includes both mild to moderate OSA as well as more severe cases of OSA.

Throat snorers who don’t have sleep apnoea
You fall into this category if you’ve tested for sleep apnoea and obtained an apnoea-hypopnoea index (AHI) score of less than 5. If you don’t know what your AHI is, we strongly recommend you get screened. Otherwise, you risk adopting a solution to the wrong problem.

At ResMed, we believe one of the most efficient treatment option for throat snoring is a custom made device1,2 that simply fits in your mouth and helps keep your lower jaw forward while you sleep – this in turn helps keep the back of your throat open.

These devices go by many names  but we call ours a mandibular repositioning device (MRD) and its named Narval CC™*.

Are you a nose snorer? Then MRDs are probably not for you. You’ll need to investigate options that include sprays, nose strips, chin straps and more. Visit your country’s sleep association for recommendations.

Throat snorers with mild to moderate obstructive sleep apnoea
If your AHI levels fall between 5 and 30, ResMed offers both the Narval MRD as well as full range of positive airway pressure (PAP) therapy options. MRDs are a first intention therapy option and a clinically-proven alternative to PAP therapy for snorers with mild to moderate OSA.3,4,5

Users tend to prefer oral appliances over CPAP, so they tend to wear them for longer periods.6 This higher ease of adoption means that they are equally as effective as CPAP.7

Throat snorers with severe OSA
If your AHI levels are over 30, your sleep physician will recommend PAP therapy as a first choice. There are different types of PAP therapy, including APAP, CPAP, and bi-level therapy. ResMed has a full range of masks, devices and accessories to make your PAP therapy as comfortable and non-intrusive as possible.

If you’ve demonstrated that you do not support PAP therapy, your sleep physician can prescribe an MRD.  In fact, in the largest multilevel study of its kind, users with severe OSA who regularly wore Narval CC were just as likely to reduce their AHI levels by 50% as wearers with mild to moderate OSA.1

Other options for treating snoring include surgery and radiofrequency treatment.

Sleep test, or polysomnography, brainwave during the night's sleep, eye movements, respiratory activities, the amount of oxygen in the blood and muscle activity are examined by measuring.

SLEEP TEST STAGES:

• The patient who is going to undergo a sleep test will go to the sleep center recommended by the doctor and prepare for the test. It is recommended that the patient take a shower to ensure that the electrodes to be glued to the patient are better adhered to in the sleep test.
• On the day of sleep test, it should not be taken alcohol, should not sleep during daytime, so as to disturb sleep quality of tea and so on. drinks should not be consumed and sleeping drugs should not be taken.
• The patient who comes to the sleep center is taken to the room where the test will be done after resting for a while. Then the patient puts on his own clothes. The sleep technician begins to connect the electrodes after explaining the procedures to be applied to the patient.
• The electrodes are adhered to the scalp, behind the ear, close to both eyes, the jaw and the chest. In order to measure the amount of oxygen in the blood, the nose is attached to the nose to examine the fingertips, snoring and breathing.
• Then all of these electrodes and sensors are connected to a device. At this stage, it is recommended for male patients to come to the sleep center where the test will be performed by shaving.
• After the sensors and electrodes are connected to the device, the technician is drawn into the monitoring room and starts to monitor the signals from the electrodes and sensors on the computer.
• In addition, the patient's image is also recorded with a camera in the bedroom.
• The results are given to the patient by analyzing the computer taken all night.

What is Oxygen Concentrator and What Does It Do?
The oxygen concentrator (sometimes known as the "oxygen generator") is a medical device used to deliver oxygen to those in need of oxygen. If people have a condition in their blood that causes low oxygen levels or gives results, they may need it. Oxygen concentrators are normally obtained by prescribing on doctor's advice. Oxygen concentrators (concentrators) are powered by plugging them into an electrical outlet or battery. If the concentrator is powered by an electric battery, it must be plugged into a wall outlet and charged. Several parts form a compressor, including a compressor, screen filter and circuit boards.
An oxygen concentrator has a compression apparatus, but it should not be mixed with compressed oxygen or an oxygen tank. Although a tank has a certain amount of oxygen dispensed, a condenser is filtered in the air, compressed, and continuously releases air. The air supply never ends. Instead of re-filling compressed air, the condenser needs only power.

How Oxygen Concentrator Works?
An oxygen concentrator works like a window air conditioning unit: it takes the air outside, replaces it, filters it and presents it as oxygen in a new form. An oxygen concentrator takes air and makes it used by people who require medical oxygen due to the low level of oxygen in their blood.
How to Use Medical Oxygen Safely
What is Oxygen Tank?
Oxygen tanks are a type of storage system that holds oxygen or liquid oxygen in a pressure vessel. The size and appearance of an oxygen tank can vary depending on where it is used and the mobility requirements.
Using Oxygen Tubes in Medical Therapy
Oxygen therapy requires the term used to describe the oxygen prescribed by doctors, a medical oxygen cylinder, and a suitable respirator. Doctors use oxygen therapy in emergency departments, during surgery, and for long-term patients who require oxygen for a medical condition.
Long-term oxygen therapy may be required for the following medical conditions:
Chronic obstructive pulmonary disease
Pulmonary Hypertension
Congestive Heart Failure
Cystic fibrosis
Lung cancer
Alpha 1
Oxygen Delivery
Taking oxygen from the oxygen cylinder to the individual usually requires a mask or nasal cannula. The mask and nasal cannula are usually attached to the tank through a hose. Then a mask is placed on a person's face over the mouth and nose. The nasal cannula is placed directly into the nostrils.
Although oxygen cylinders are containers containing pressurized oxygen, they are used in a variety of different environments and situations. The proper use and dimensions of the medical oxygen cylinder will vary depending on the size of the tube that the doctor determines is the most suitable.
Safety of the Medical Oxygen Tube
Many patients who use home and portable oxygen tanks are curious about the safety of storing tanks. When care is taken in handling and storing tanks, fire and other hazards are minimized.

History of the Oxygen Concentrator
Have you ever wondered the history of the oxygen concentrator from the past? While the use of oxygen for medical purposes has continued since the 1800s, the use of modern oxygen concentrator technology is quite new. It is interesting to see that today's oxygen stores are delivering oxygen to the patients by absorbing oxygen in the air that surrounds the oxygen that physically stores oxygen with today's oxygen concentrators.
Oxygen was first discovered in 1772 by a Swedish chemist, Carl Wilhelm Scheele. However, a British researcher, Joseph Priestley, independently found oxygen in 1774 and published his findings three years before Scheele was published.
It was first noted that oxygen use was made on 6 March 1885 by Dr. George Holtzapple, who used oxygen for the treatment of pneumonia in York, PA. Then, in the early periods of 1887, a woman used oxygen from a device that stored enough oxygen.